As I have noticed the plastic door panels for the 1g are basically impossible to find...in an effort to repair the cracked ones I have now, does anybody have a go to method for doing such a thing...some help here would be greatly appreciated...Thanks.
0
Plastic Panel Fix?
Started by '85-SI, Oct 08 2008 10:21 PM
4 replies to this topic
#1
Posted 08 October 2008 - 10:21 PM
#2
Posted 08 October 2008 - 10:26 PM
Yes, I do. You'll need a dremel, acetone and some spare ABS plastic (from a broken header panel, fender, sideskirt or door skin). Usinng your dremel, make a channel along the crack (either on the back or face of the piece. Break up some ABS in a GLASS jar with acetone. Allow the acetone to melt the ABS and then use it as a paste to fill the channel you made. Allow to dry overnight. Re-apply if necessay or sand smooth. I found I needed to reapply at least once to fill air holes and such. I repaired all my sideskirts and door skins with this method and you can't tell they were ever broken. I think there are some threads on this subject if you look for them. Good Luck!
Adding power makes you faster in the straights. Subtracting weight makes you faster everywhere. - Colin Chapman
#3
Posted 08 October 2008 - 10:33 PM
Oh, and hand sand - DO NOT USE A POWER SANDER - it will melt the ABS again. Ask me how I know.
Adding power makes you faster in the straights. Subtracting weight makes you faster everywhere. - Colin Chapman
#4
Posted 08 October 2008 - 11:45 PM
QUOTE (Sgt. Pepper @ Oct 8 2008, 10:26 PM) <{POST_SNAPBACK}>
Yes, I do. You'll need a dremel, acetone and some spare ABS plastic (from a broken header panel, fender, sideskirt or door skin). Usinng your dremel, make a channel along the crack (either on the back or face of the piece. Break up some ABS in a GLASS jar with acetone. Allow the acetone to melt the ABS and then use it as a paste to fill the channel you made. Allow to dry overnight. Re-apply if necessay or sand smooth. I found I needed to reapply at least once to fill air holes and such. I repaired all my sideskirts and door skins with this method and you can't tell they were ever broken. I think there are some threads on this subject if you look for them. Good Luck!
I can also vouch for this method.
I saw his thread and have started repairing pieces myself with great success.
I also discovered that if you are missing a piece, you can put some aluminum window screen on the back of the piece,
and then build up the section with the same mixture.
QUOTE (Sinic @ Apr 21 2010, 09:47 PM) <{POST_SNAPBACK}>
You really know you have made it far on rpr when someone quotes you in their signature. I can't wait for the day!
#5
Posted 09 October 2008 - 04:14 AM
That's genius...I never even thought of that....what a great idea...I will definitely be doing that, I will have to search for that link now to see this too. Thank you guys so much I thought I was doomed for a moment there...